Phoroptor Cleaning

It is recommended to have regular preventive maintenance for all your equipment keeping it in good mechanical working order and optically accurate. Over time the lubrication deteriorates and dries out, causing certain parts to become worn and should be replaced. Optics become dirty and can cause incorrect Rx readings. If it has been 12-18 months since your phoroptor has been serviced, let our expertly trained staff properly recondition it. 

 

Reconditioning Process

Your refractor / phoroptor is disassembled.
All mechanical parts are cleaned and lubricated with proper lubricants, repositioned correctly and adjusted smooth operationaltouch.
All optics (lenses and prisms) are thoroughly cleaned and checked.
All scales are cleaned and aligned.
Lubricate and adjust main support PD and convergence controls, reading rod arm and top locking device.
Clean, lubricate and align loupe turrets, including Jackson cross cylinders and prism assemblies.
Adjust all control knob tensions to correctsmooth operating industry standards.

 

This maintenance is critical for the life of your phoroptor

 

Phoroptor Cleaning